REFINISHING
Tile,
Tubs, counter tops, sinks (
TUBS IN GOOD CONDITION
TUBS IN ROUGH CONDITION. Including metal exteriors.
EXTERIOR: Metal
surfaces. Apply Shield Metal/Primer Cleaner/ Rust remover. Use
SKU-40003. If surface is not satisfactory and you
may have to apply an Epoxy coat use. We recommend our Epoxy SKU-20900-.
Use Super Shield
Fluoropolymer SKU-20059 as a top coat. Apply one or two coats as needed. Apply second coat
when first coat is tack free. Approximately 15 to 30 minutes. Gloss, Satin or
matt & Colors
available.
INTERIOR:
The porcelain should be cleaned with TILE PREP SKU-50801.
Repair any missing Porcelain,
Apply Super shield
SKU-20059- one or two coats as desired.
Apply at 2-3 mils wet
Dry Film thickness. should be at least one mil
RESULTS
Fluoropolymer refinishing process
assures many years of enjoyment with a beautiful finish, without the normal
tear-out and replacement. And don't forget, it's not just
bathtubs, Refinish fiberglass shower enclosures, kitchen
counter tops, kitchen cabinets, kitchen appliances (like
refrigerators), wall and floor tile, and much more. Dirt will
not stick to Fluoropolymer making it much easier to keep clean.
Great for Hotel, Motel and condominiums
FLUOROPOLYMER COATINGS
20 year Life. All-Colors- Mat-Satin-Semi-gloss-Gloss. Fast
dry-non fade-no chip,crack . Spray-
Roll, Bake or dip. Apply to most surfaces,
Copper, Brass, Steel, no more tarnishing.
Fiberglass, Porcelain, Granite, Marble, Polypropylene & Gel coat. Available in
Quarts, Gallons,
five gallons, You'll find that most jobs can be
completed in less than one day, (use in 24hours.