FLUOROBLEND-Water base
 

A topcoat formulated to provide the ultimate in resistance to weathering and ultraviolet degradation with unsurpassed gloss. waterbase based coating will retain its appearance over an expected life in excess of 5 years in even the most aggressive environments.

Recommended Uses:
As a shop or field applied topcoat for prepared  concrete, glass, fiberglass, gel coat, vinyl, wood or plastic surfaces where the very best appearance retention and wear is required.

No chalking, fading, chipping or cracking.
Available in high gloss, semi-gloss satin or matte finish.
Spray, dip, roll or bake.
VOC Compliant.

Application:
1) Water base, apply one liberal coat. 2-3 mils wet.
2) ONE MIL DRY

Water Base Cure Time: 4-5 hours, subject to heat and humidity

Drying Time: at 72°F, water base 30 minutes to 1 hour,

Crosslinker: Mix slowly, avoid bubbles. Four ounces per gallon. Instant induction.

Physical Data:
Water Base Shelf Life:   12 months, keep cool, keep covered.

Water Base Pot Life:      unlimited 

Gloss: 90°
Recommended
Application Temperature Range: 40° to 90°
Relative Humidity:  90° maximum
Substrate Temperature:  90°
Dew Point:  +5°
Minimum Surface Prep:  Clean and Dry
Theoretical Coverage: 400 sqft, one coat
Flash Point: NA

Note:
Maintenance: Should you need to make repairs, feather edge the area and re-coat.
Recoatable: When tack free.
The ultimate in resistance to weathering and ultraviolet retention. Coating will retain its appearance5-10  years in even the most aggressive environments.