"FLUOROPOLYMER COATINGS"
A Revolutionary New Coating Formula that lasts 20-30 years without fading, chalking or cracking (recoatable)

Fluoropolymer; Coats Fiberglass, Metals, Tile, Wood, Swimming Pools, and Concrete. Will not fade, crack, chalk, peel, chip, or yellow. The hardest, most flexible, high quality coating of its kind. Impervious to chemicals. Dirt and grime can't stick to it. Prevents mildew, rust, and corrosion. Will restore original color. Can be brushed rolled, or sprayed. Fast drying time, Performance like no other coating - Lasts 20 to 30 years!

SKU-20059VC  SUPERIOR SHIELD - HIGH PERFORMANCE FLUOROPOLYMER-VOC
Our highest quality Coating –Longest lasting, Toughest coating available. Great adhesion, fast dry!, rolled, or sprayed. Flatteners can be added to create, Satin, Semi Gloss or Matt. – Last 20-30 years! Coverage approx 600 Sq. Ft. per gallon sprayed. Post add any color   VOC COMPLIANT (SKU20059 VC ) AVAILABLE IN Quarts, Gallons, fives or Drum.

SKU-20043 SUPER SHIELD FLUOROPOLYMER
The hardest, yet flexible, product of its type! Fast drying. Non-slip, low co-efficient wet or dry. Colors can be post added - Flatteners can be post added. Easily mixed to Satin, Semi Gloss, or Mat. Last 10- 20 years! Coverage approx 600 Sq. Ft. per gallon sprayed. Available in Quarts, Gallons, Fives or Drums

SKU-40081 TEAK SHIELD WOOD COATING   Excellent for all woods, Long lasting, easy application, no fade, no chalking, very flexible yet hard as nails. , No mildew. Great for Teak wood, Mahogany and many other woods.. Can always be recoated without removing. Available in Quarts, Gallons, Fives or drums.

SKU 66071-1 FLUOROBLEND-ACRYLIC COATING- Inexpensive long term coating, color can be added-Last up to 10 years under most conditions, can also be used as a primer coat or top coat. Contains Fluoropolymer, Low cost, easy application. Single component, one coat. Available in quarts, gallons, fives or drums. Primers available.

SKU 66070-1 FLUOROBLEND WATERBASE COATING. A semi-formulated, waterbase, self crosslinking, aliphatic urethane-acrylic-Fluoropolymer composition. Cures to a high gloss or multitude of colors. It's unique chemistry provides outstanding chemical, water resistance properties. It excels as a wood finish: especially in areas that demand high wear surfaces such as gym floors, concrete or wallboard. Great as a primer or topcoat.. Available in gallons, fives or drums.   Primers available  

SKU50001 SHIELD DEGREASER  Best you can buy, low cost, covers large area, leaves no residue. Great for tough stains, Garages, concrete floors, warehouse floors. Emulsifies with water. Available in fives or Drums.

SKU-20900 EPOXY PRIMER/SEALER-Clear coat.
A two component high performance polyamide epoxy coating primer and sealer. Offers excellent sealing capabilities and moisture control. Available in Clear -5-6 mils. Recoat in 4-6 hours. Easy mix 1 to 1 ratio. Coverage approximately  300-sq ft Ft. per Gl.   Available in Gallons

SKU-20200 EPOXY TOP COAT, Colors  High Solids,  A two component High Build Epoxy top coat that offers an excellent defense to exposure even in severe industrial and marine environments. High performance resistance to fresh and salt water, with long lasting abrasion and moisture protection. Impervious to most chemicals. Available in  Colors, . 13-14 mils . Tack free 2-4 hours. Foot traffic 10-12 hours. Easy mix 4 to 1 ratio. Coverage 150-200 sq ft per Gal.  We recommend top coating the Epoxy SKU20200 or SKU20900 with one of our Fluoropolymers for long term protection.  Available in gallons or fives.

ATS100-1 Gloss Modifier-Liquid
Flattener can be mixed into Fluoropolymer Solvent base or Water Base formulas quickly and easily. Converts Gloss to Satin, Semi-gloss or Matt in minutes Easy to follow Instructions. You can do it so you get it where you want it. Available in Quart sizes & gallons.

SPI-1100-A & B  Caulking, Polysulphide Modified Novalac
Product is 100% solids two component, high performance caulk offering excellent adhesion, durability-chemical cure resistance, flexibility,
elongation and compression! It's design is for caulking and sealing joints subject to structural movement and is formulated for application up to one inch thick if desired in one application. Can be top coated with Super Shield within 2-3 hours cure time. Mix ratio is one to one. Can be used with standard caulking gun. Available in quarts and gallons.